By continuing to use this website you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them. Parts of this website will not function correctly without them.
Accepts J, K, T type thermocouples and 3-wire PT100
Contains two independent timers, T1 and T2
Timer T1 for use with any output, with minute and second based time intervals.
Timer T2 for activation at the end of the first timer.
5V voltage pulse output
Up to three relays (2 x SPST 1.5A, 1 x SPDT 3A)
Available with standard 100 to 240Vac or low voltage 12 to 24Vdc power supply
The N1040-T is a temperature controller which accepts J/K/T type thermocouples and PT100 (3-wire) input and provides a 5V voltage pulse output, as well as up to 3 relays (2 SPST, 1 SPDT).
Specifications
Input
Channels
1
Digital
Dry contact/open collector NPN
Rtd
Pt100 (3 wire)
Thermocouples
Type J, K, T
Impedance
> 10 MOhms
Excitation Current
0.170mA
Output
Channels
4
Analogue
Voltage pulse 5V/25mA
Relays
2 SPST 1.5A/240Vac/30Vdc, 1 SPDT 3A/240Vac/30Vdc
Power
Power Supply
100 to 240Vac/48 to 240Vdc, or optional 12 to 24Vdc/24Vac
Frequency
50/60Hz
Max Consumption
6 VA
Measurement
Range
-200 to 1370°C
Precision
0.25% of the span ±1°C for thermocouples, 0.2% of the span for Pt100
Internal Resolution
32767 levels (15 bits)
Warm Up Time
3 seconds
Sample Rate
up to 5 per second
Interface
Indicators
RUN, OUT, A1, A2, A3, A4 display indicators
Display
2 values
Controls
Silicone keypad
Connections
Screw terminals on back
Build
Dimensions
48 x 48 x 80mm
Panel Cut Out Size
46 x 46mm
Weight
75g
Mounting
Panel mounted, mounting clips included
Material
Polycarbonate UL94 V-2 front, ABS + PC UL94 V-0 enclosure
By continuing to use this website you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them. Parts of this website will not function correctly without them.
Guest
