Large rubber keypad for navigation and configuration
For use with the FieldLogger 512k
The HMI (Human-Machine Interface) is available as an accessory to the FieldLogger. Several features are implemented in this device, such as enabled channels monitoring, viewing these channels in chart mode, alarms monitoring, status checking and configuration of some basic FieldLogger operation parameters and also viewing the device data download progress when using a USB flash drive.
Detailed HMI installation and operation instructions are all in the FieldLogger manual, which you can download below. For the correct HMI operation, FieldLogger must have software version 1.01 or higher. We always endeavour to have all the latest software's available for download. All operations performed on the HMI are done using the keypad on the right hand side. Avoid touching the HMI screen.
RS485, up to 850m
Colour 2.4V QVGA screen
4 silicon keypad buttons and enter key
DB9 connector to FieldLogger 512k, also attachable via extension cable