TxRail

Description

The TxRail DIN-rail mounting temperature transmitter is used to convert thermocouple or PT100 sensor outputs to an industry-standard 4-20mA or 0-10 Vdc signal. The unit can be fully configured by the end-user to accept most thermocouple types and PT100 RTD.

Configuration of input type and working range is achieved using the TxConfig adaptor and Windows software.

Specification

• Power supply: 12 to 30 Vdc (18 to 30Vdc for 0-10V output version)
• Programmable input: thermocouple types J, K, T, N, E, R, S, B, and PT100 RTD
• 2-wire loop powered 4-20mA output (NON isolated - see TxIsoRail for isolated version)
• Linearised output and cold junction compensation for thermocouples; 2 or 3-wire Pt100 with linearisation
• Programmable working range
• Manual zero (offset) adjustment using a wire jumper
• Input digital filter can be selected for optimum 50 or 60Hz performance
• Accuracy: +-0.2% full scale for Pt100 and 0.3% max. of FS for thermocouples
• Temperature effect: 0.003% SPAN/ºC
• Working temperature: -40 to +85ºC
• Programmable burnout upscale or downscale sensor failure protection
• 35mm DIN-rail mountable

Factory Settings

• Input Type - Pt100
• Range - 0-100°C
• Frequency - 60Hz
• Sensor Failure - Upscale

Dimensions & Mounting

Dimensions: 65x78x19mm

Re-Ranging

If you require any other range we can reprogramme this for a £5 fee (select option above) - or alternatively you may wish to invest in the TxConfig Kit, which will allow you to totally configure and re-configure the instrument yourself.

Options

The TxRail is also available with an output range of 0 - 10Vdc. Use the buttons above to select if required.
Options coloured green are usually held in UK stock for immediete dispatch.

Downloads