TxConfig-HART

Description

The TxConfig-HART is a configuration interface for transmitters with HART protocol. It can be used together with the configuration software TxConfig.

Quick and easy configuration is made possible by the TxConfig software. Set transmitter parameters such as sensor type, sensor range values, filter optimization frequency, sensor failure detection and zero correction value. A communication path needs to be established between the transmitter and the USB port of a PC, provided by the TxConfig adaptor cable (USB end connects to the PC, other end goes to the transmitter).

In the TxConfig-HART there is a USB communication interface, which must be connected to the available USB port. Windows will request proper driver installation, which is found on the CD that is provided with the transmitter.

Specification

Easy to install, no special driver needed

USB communication witht he PC serial with the transmitters

Pins to HART device: polarity insensitive test clips

Compatible with USB 1.1 and 2.0

Rx/Tx LED indicators

Power: no external power supply required

Operation temperature: 0 to 50°C

Storage temperature: -40 to 80°C

Humidity: 0 to 95% (no condensing)

Isolation: 1500 Vdc galvanic isolation between transmitter and PC

Operating system: Windows 2000/XP/Vista and Windows 7

Dimensions: 70x45x18mm

Options

Options coloured green are available ex-stock and can be despatched immediately.

Downloads