Temp-WM

Temp-WM Wall Mount Temperature Transmitter

Price: £58.00 (Excluding VAT at 20%)

Quantity:

description:

The Novus TEMP-WM is a highly accurate, highly reliable temperature sensor it was designed for wall mounted applications. It converts the measured values into an industry standard linear 4 to 20 mA signals.
The microprocessor based circuit enables full configuration of output range when used with the TxConfig PC interface and the Windows® based software.
The TEMP-WM model is dedicated to wall mounted applications.

specification:

• Temperature:
•     Accuracy: 0,5 °C @ 25 °C.
•     Repeatibility: ±0,1 °C.
• Range: programmable between -50 and 120 °C (please check operational limits).
• Response Time: up to 30 s in fairly still air.
• Operational limits:
•     Electronic module(WM-DM): -20 to +65 °C, 0 to 95% RH;
•     Sensor and Probe (DM): -40 to +100 °C.
• Note: When measuring temperatures higher than +65 °C or lower than -20 °C, only 50% of the probe total length must be inserted into the measured environment.
• General Features:
• Power:
•     12 to 30 Vdc (model 4-20 mA);
•     18 to 30 Vdc (model 0-10 V).
• Cable input: PG7 cable gland.
• Output:
•     Two-wire loop powered 4-20 mA or 20-4 mA.
•     Voltage output: 0-10 Vdc or 10-0 Vdc (optional).
• Output resolution:
•     0,006 mA (4-20 mA);
•     0,003 V (0-10 Vcc).
• Output load (RL):
•     Model 4-20 mA: RL (max. in Ohms) = (Vdc - 12) / 0.02; where: Vdc=power voltage in Volts.
•     Model 0-10 Vdc: 10 kOhms minimum.
• Ingress Protection:
•     Electronic module case: IP65;
•     Sensor probe: IP40.
• Internal protection against reversed voltage wire polarity.
• No electrical isolation between input, output and power circuits.
• Dimensions: 70x80x35mm.
• Temp-DM Duct Mount can be purchased with 150mm and 250mm probes