N1100 I/O

N1100 with Digital I/O - Universal I/P - 2 Relays, Pulse or 4-20mA O/P

Price: £97.00 (Excluding VAT at 20%)

Quantity:

description

The N1100 I/O Temperature Controller is designed to measure, indicate and control temperature.
The N1100 I/O accepts an input from a temperature sensor and has an output connected to a control element (such as an heater of fan...), the N1000 I/O then compares the actual temperature to the desired control temperature and automatically compensates for changes in the system using a PID algorithm ensuring minimum under/overshoot.
The N1100 I/O includes a RS485 comm with Modbus RTU protocol effectively alowing a much easier integration of the instrument to microprocessor-based data acquisition systems and because acquiring an analogue signal is more complex than acquiring a digital one, the N1100 I/O will save you a significant amount of time and money!!!


specification

• Universal Input accepts: Thermocouples J, K, T, S, Pt100, 4-20mA, 50mV, 0-5Vdc
• Double LED display: red for PV and green for SV
• Outputs: 3A/250Vac Relay, linear 4-20mA and logic pulse for solid state relays available
• 2 alarms (Relays SPST) more Out linear 4-20mA or logic pulse (standard)
• Up to 2 time relays, 0 to 6500 seconds
• Input resolution: 12,000 levels
• PV or SP retransmission in 4 to 20mA
• RS485 comm with Modbus RTU protocol
• Auto tuning PID control
• Auto/Manual mode, bumpless transfer.
• Remote setpoint input (4 to 20mA)
• Programmable Soft start up to 9999 seconds
• Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments
• Power: 85 to 264 Vac, 50/60 Hz
• Front panel: IP65, Polycarbonate UL94 V-2
• Back panel: IP30, ABS+PC UL94 V-0
• Dimensions: 48 x 48 x 106 mm